Bwrkp Divider Saddle Sink Draining Rack Steel Navy

Overview

One brushed stainless-steel draining rack that straddles the raised divider of a compatible double-bowl sink. Two padded jaws tighten against opposite divider faces, while the slotted deck drains directly into both bowls.

Specifications

• Rack dimensions: approximately 36 cm L x 18 cm W x 14 cm H
• Usable deck: approximately 31 cm L x 16 cm W
• Frame material: brushed 304 stainless-steel wire
• Dish slots: exactly 6 vertical plate slots
• Slot spacing: approximately 3 cm
• Mounting format: one inverted U-shaped divider saddle
• Compatible divider thickness: approximately 3-7 cm
• Clamp jaws: exactly 2 stainless plates with navy silicone pads
• Adjustment: exactly 2 side threaded knobs
• Cutlery component: exactly 1 removable navy perforated polypropylene cup
• Drain component: exactly 1 removable navy silicone center drip strip
• Recommended static load: up to 5 kg total when centered and correctly clamped to a rigid compatible divider
• Product Net Weight: approximately 1.45 kg including supplied components

Features

• The saddle positions the rack above a double-bowl divider rather than across the outer sink rim.
• Six plate slots stand above an open wire deck.
• The cutlery cup and center drip strip remove independently.
• No roll-up rods, telescoping handles, countertop tray, dishes, utensils, tools, or cleaner is included.

Package Includes

• 1 brushed-steel divider saddle rack
• 2 padded stainless clamp jaws
• 2 threaded adjustment knobs
• 1 navy perforated cutlery cup
• 1 navy silicone center drip strip
• 1 fit and care card

Installation and Care

Measure the raised sink divider before ordering. Use only on a rigid divider within the stated thickness range and with enough clearance for both jaws; do not clamp to fragile, rounded, flexible, cracked, coated, or undermined edges. Center the rack, tighten both knobs evenly by hand, and test stability with a light gradual load. Do not exceed the stated static limit, place knives point-up, allow items to overhang dangerously, or use the rack for body support. Remove items before adjusting. Wash with mild detergent, rinse, dry all wires, jaws, pads, cup, strip, and threads, and inspect the clamp before reuse.